Road Trip Planner

Plan a multi-leg road journey: add legs, see total distance, driving time and fuel cost.

Road Trip Planner

About this tool

Some journeys have several parts: a drive to a terminal, a bus to another city, then a drive into the hills. Others are self-drive tours with planned overnight stops. The road trip planner lets you list each leg and see totals for distance, driving time and, optionally, fuel.

How to use it

  1. Name each leg and enter its distance in km. Use "+ Add leg" for more.
  2. Set an average speed for time estimates.
  3. Optionally add your fuel average and the fuel price to estimate cost.
  4. Press Plan trip to see a per-leg table and totals.

How it works

Total km = Σ legs. Time per leg = km ÷ speed. Fuel cost = total km ÷ km/l × price.

Worked example

Islamabad → Abbottabad (120 km) and Abbottabad → Nathia Gali (35 km) at 50 km/h average gives 155 km and about 3 h 6 min of driving.

Planning tips

  • Use lower average speeds for mountain legs.
  • Plan overnight stops so that no single day has more driving than you can do comfortably in daylight.
  • Check weather and road status before mountain legs in winter.

Designing sensible legs

A leg is any part of the trip you want to measure separately: a day's driving, a section between overnight stops, or a transfer to and from a bus terminal. Good legs make the plan readable. As a rule of thumb, keep any single day's driving within what the drivers can manage comfortably in daylight, with a break at least every two hours. Mountain legs deserve extra caution: shorter distances, lower speeds and earlier starts.

Worked example: Islamabad to the Galiyat and back

A family plans a short northern trip using illustrative distances:

LegDistanceSpeed
Islamabad → Abbottabad (motorway)120 km70 km/h
Abbottabad → Nathia Gali (hill road)35 km30 km/h
Nathia Gali → Murree35 km30 km/h
Murree → Islamabad60 km40 km/h

Because the planner uses one average speed for all legs, run it twice: once for the motorway leg at 70 km/h and once for the hill legs at 30–40 km/h. Then add the times together. With a fuel average of 11 km/l, the 250 km total uses about 23 litres.

Mixing bus and car legs

Some trips combine a long-distance coach with a hired car or a friend's car at the far end. List every leg to see the full distance and time. For costs, include fuel only for the car legs, and add the coach fare separately with the bus trip expense calculator. This gives a fair picture of whether driving the whole way would be simpler.

Safety and seasonal checks

  • Check weather forecasts and road status before mountain legs, especially in winter, when snow can close roads to hill stations.
  • During the monsoon (roughly July–September), landslides and flooding can affect hill roads and low-lying areas.
  • Plan to finish mountain legs before dark.
  • Keep fuel above a quarter tank in remote areas, where filling stations can be far apart.
  • Tell someone your route and expected arrival times.

Limitations

The planner doesn't know road conditions, closures or tolls. Add tolls with the toll budget calculator.

Related tools

Frequently asked questions

Can I mix bus and car legs?
Yes. Enter all legs for total distance. For costs, use the fuel fields for car legs only, or calculate them separately.
Is my plan saved?
No. Nothing is stored or sent. Take a screenshot or print the page to keep it.
Can I set a different speed for each leg?
Not in this version. Run the planner once per speed band and add the results, as shown in the example.
How many legs can I add?
As many as you need. Use "+ Add leg" for each extra section.
Is my data saved or sent anywhere?
Calculations happen in your browser. Nothing is sent to a server. Only the packing checklist saves ticks, in your own browser storage.